In order to celebrate our 5.0 release, for a very limited time, cubeSQL unlimited connection is now just $99.
If you have firewall turned ON on your Mavericks/Yosemite system that you could have troubles running cubeSQL because its default 4430 port could be blocked by default.
Starting from Yosemite OS X 10.10 ipfw has been removed (ipfw was the previous Mac firewall that could be easily configured using command line parameters and it has been replaced by pfctl). pfctl seems to prefer configuration files to command line parameters, which I find frustrating and it is a bit more complicated to configure. The ideal solution would have been to have it automatically configured within cubeSQL Mac installer but there are so many options that I prefer to have your configuration rules not touched and leave that option to you.
As someone suggested you can use a couple of nice freeware utilities which are basically a fronted to the command line described below. My personal suggestion is for: Icefloor but I think that Murus should also work fine. The only required thing to do is just to open the default 4430 TCP port used by cubesql.
So here you go a step by step terminal instructions (mostly taken from http://tinyurl.com/lz5y2sb):
sudo vim /etc/pf.conf
Add this line to the config file (after the com.apple anchor is fine) where en0 is your ethernet adapter and port 4430 is the port you’re using in cubeSQL:
pass in on en0 proto tcp from any to any port 4430
This allows TCP data on port 4430 to pass into your machine via en0. This allows it from any IP address, but you could have changed the first mention of “any” to an IP address in order to only allow from a single IP address.
If you aren’t using a wired connection, you can change en0 to en1, or if you’re uncertain which adapter you’re using, run the following command to see which is active on your setup, noting which has a status of “active”:
Save the config file and run the following to reload the config file, and verify using verbose:
sudo pfctl -vnf pf.conf
I also ran this, just in case:
sudo pfctl -Rf pf.conf
Yes it is not easy nor intuitive but this is the only solution if you want to have your firewall turned ON on Mac. (I promise that I’ll try to find out a better and preferably automated way to setup the firewall.)
After many months of development we are really happy to announce the immediate availability of cubeSQL version 5. This version represents an important milestone where we fixed all know bugs and we added a lot of important features. I’ll blog more about some of them in the upcoming weeks.
MacOS X installer has been rewritten from scratch using a custom made AppleScript application (its source code is available in the script folder inside the complete package). In this way we can support again MacOS X 10.6 and finally dropped the buggy PackageMaker app previously used for the MacOS X installer.
Due to the massive amount of work done in the SSL stuffs and thanks to the incredible support from Roth Soft AG, cubeSQL has officially been certified by a third party security and penetration testing company like Compass Security AG, specifically from its subsidiary Qualys SSL Labs.
What’s new in this version:
- SERVER: Added new FILE UPLOAD/DOWNLOAD capabilities
- SERVER: Added ATTACH/DETACH database commands
- SERVER: Added shared cache mode options
- SERVER: Added zipfs sqlite support
- SERVER: Added ability to open databases outside of the “databases” folder
- SERVER: Added cubesql_register_tokenizer to plugin SDK
- SERVER: Added custom JSON startup config file support
- SERVER: Greatly enhanced SSL security to both client and server
- SERVER: Added peer client verification to SSL
- SERVER: Added new SSL+AES encryption
- SERVER: Added the ability to bridge to different database engines (PostgreSQL fully supported)
- SERVER: Added CLOSE database command (to completely unload database)
- SERVER: Upgraded sqlite to version 3.8.7 (up to 50% faster than cubeSQL 4.5)
- SERVER: Added a new command line parameter to specify custom log directory location
- SERVER: Added support for UNICODE61 (in FTS3/4)
- SERVER: Fixed issue with non native connections
- SERVER: Fixed some JSON over TCP issues
- SERVER: Improved JSON handling
- SERVER: Fixed some Win32 related issues
- SERVER: Win32 DLL now loaded from a custom DLL directory (with 32/64bit subdirectories)
- SERVER: Removed MVCC code
- SERVER: Improved set resource limits on Mac and Linux
- SERVER: Several others fixes and improvements
- ADMIN: IP address is now reported on Log pane
- ADMIN: Overall improvements and fixes
- OTHER: Updated cubeSQL Preference Pane on MacOS X
- OTHER: New startup script on MacOS X
- PLUGIN: New Xojo plugin format in addition to Real Studio format
- PLUGIN: Now correctly detects when SSL is not installed
- PLUGIN: Added support for new SSL+AES encryption protocol
cubeSQL is available for MacOS X (32 and 64bit), Linux (32 and 64bit) and Windows (64bit only).It can be downloaded from:
We just updated both Xojo and REALbasic plugins to a stable 1.9.6 version. If you use any of them to connect to cubeSQL you are recommended to upgrade the plugin.
Latest version can be downloaded from:
We are happy to announce that we just released SQLiteManager 4.3.5 version with the following changes:
- Updated sqlite to the latest 3.8.7 version.
- Improved SQLCipher support.
- Fixed a delay issues while typing in the SQL pane.
- Added a preference to disable syntax highlight in SQL pane.
- Improved record editor.
- Improved error reporting.
You can download this version from: http://www.sqlabs.com/sqlitemanager/
I could’t agree more so I just post a link to this excellent article:
With the recent release of Yosemite, Apple changed the way startup items works (they removed support for the old StartupItems way).
So in order to automatically launches cubeSQL on system startup you need to copy the script:
into the system folder: /Library/LaunchDaemons
Make sure the plist has the following privileges:
To change plist privileges from the Terminal just type:
sudo chown root:wheel com.sqlabs.cubesql.plist
Please note that the upcoming cubeSQL version 5 will automatically take care of the change.
We am happy to announce the immediate availability of SQLiteManager 4.3.3 that among several issues fixed it adds support for the extremely popular SQLCipher sqlite database encryption extension (256-bit AES encryption).
What’s new in version 4.3.3:
- Added support for SQLCipher encrypted databases.
- Fixed some printing issues.
- Fixed issue with dump command and encrypted databases.
- Fixed issue with add/change/remove encryption commands.
- Fixed clustered primary keys in Table design.
- Other issues fixe and improvements.
You can download the latest version from:
We just released a new SQLiteManager version which fixes all reported issues. This is a recommended update for all users.
The list of what’s new is pretty short but it contains a lot of important changes:
- Several issues fixed
- Restored ALT/CRTL + RETURN shortcut in SQL pane
- Minor improvements
As usual the new version can be download from: